Microsemi's PD-9501G is a single port solution for remote powering of current as well as emerging high power applications.
The PD-9501G is designed specifically to power IEEE 802.11n and IEEE 802.3at access points, pan-tilt-zoom (PTZ) and dome cameras, IP videophones, thin clients and other high power Ethernet end terminals with 60W of power, and is also backward compatible and safe to use with any 802.3af terminal such as VoIP phones, IP cameras and wireless LAN access points.
It can power both existing 10/100Base-T devices and emerging wireless Gigabit devices such as WI-MAX and wireless IEEE 802.11n access points.
With the midspan's plug-and-play installation, they are easily and cost effectively implemented leveraging an existing Ethernet infrastructure while at the same time providing the assurance of a future proof network.
Up to 60W of power over 4-pairs
Cisco and legacy PoE support*
AC and DC input models available
No. of Ports
Pass Through Data Rates
Pin Assignment and Polarity: Data Pairs 1/2 (–) and 3/6 (+) Spare Pairs 7/8 (–) and 4/5 (+) Output Power Voltage: 54-57Vdc User Port Power: 60Watts Max.
Input Power Requirements
PD-9501G/AC Input Voltage:
100 to 240 Vac
PD-9501G/AC Input Current:
1.2A @ 100-240 Vac
50 to 60 Hz
PD-9501G/24VDC Input Voltage
PD-9501G/24VDC Input Current
PD-9501G/48VDC Input Voltage
PD-9501G/48VDC Input Current
87.9 mm x 51.3 mm x 166 mm
.881 lbs (400g)
System Indicator: AC Power (Green) Channel Power (Green and Orange)
Shielded RJ-45, EIA 568A and 568B
Operating Ambient Temperature:
14° to 113°F (-10° to 45°C) @60W 14° to 131°F (-10° to 55°C) @30W
Maximum 90%, Non-condensing
–4° to 158°F (–20° to 70°C)
Maximum 95%, Non-condensing
–1000 to 10,000 ft. (–304.8 to 3048 m)
MTBF: 100,000 hrs. @25°C
IEEE 802.3af (PoE), Pre IEEE 802.3at (including 2-event), RoHS Compliant, WEEE Compliant, CE
Electromagnetic Emission & Immunity
FCC Part 15, Class B EN 55022 Class B (Emissions) EN 55024 (Immunity), VCCI