Microsemi's PD-9001GR is a single port solution for remote powering of high power edge devices requiring up to 30W of scalable power-over-Ethernet.
The IEEE 802.at standard PD-9001GR PoE midspan was recently upgraded to a smaller form factor but still comes with the industry leading PoE technology that enables 30W of PoE over standard Cat5 or better cables to easily upgrade IP surveillance devices, WLAN APs and other Ethernet devices. This plug and play device allows easy installation and placement in hard-to-reach places. Combined with a PoE extender, Ethernet devices can easily be powered more than 100M away from network room at gigabit data transfer rates.
Up to 30W of power
Cisco and legacy PoE support
No. of Ports
Pass Through Data Rates
Power over Ethernet Output
Pin Assignment and Polarity: 4/5 (+), 7/8 (–) Output Power Voltage: 55Vdc User Port Power: 36W Typ.
Input Power Requirements
AC Input Voltage: 100 to 240 Vac AC Input Current: 0.8A @100-240 Vac AC Frequency: 50 to 60 Hz
55 mm (W) x 32.5mm (H) x 140 mm (L)
.44 lbs (200g)
AC Power (Yellow) Channel Power (Green)
Shielded RJ-45, EIA 568A and 568B
Operating Ambient Temp.:
-4°to 104°F (-20 to 40°C) @ 30W -4°to 131°F (-20 to 55°C) @ 22.5W
Maximum 90%, non-condensing
-4°to 158°F (-20°to 70°C)
Maximum 95%, non-condensing
IEEE 802.3at (PoE) RoHS Compliant, WEEE Compliant, CE
Electromagnetic Emissions & Immunity
FCC Part 15, Class B EN 55022 Class B (Emissions) EN 55024 (Immunity), VCCI